Sold out
SERIAL NUMBER 1537
Based on our acclaimed Octo Puss pedal, this special edition has been hot-rodded with the addition of a beautiful gold-pin NOS germanium transistor. This limited edition boasts a studio-quality frequency response, combined with the touch-sensitivity of a truly premium gain stage.
This pedal begins with a tube inspired JFET circuit, which provides a very responsive input stage and drives our passive octaver. By combining a cutting-edge transformer with NOS germanium diodes, our octave circuit can handle everything from ethereal chordal playing through to classic ring-modulator special effects. Finally, the signal chain is topped off with a specially voiced gain stage courtesy of a stunning gold-pin NOS germanium transistor. The result is an incredibly versatile octave pedal which can seamlessly transition from modern clean rhythm sounds, to searing vintage lead tones. It features a single Gain control for adjustment of the overall output level, which can be used in conjunction with the controls on the guitar to provide an astounding wealth of tonal variety.
Unlike typical Germanium pedals, this one can be placed anywhere in the signal chain and can even be used after buffers, active pickups, and wireless systems.
Housed in a custom retro inspired enclosure and hand finished in genuine Ice Blue Metallic nitrocellulose lacquer.
Controls
-Gain pot (top middle) adjusts the output level.
-On/off footswitch (bottom middle) with true bypass wiring.
-On/off indicator LED (top right).
Connections
-Mono 1/4" input and output jack sockets (side-mounted).
-Industry standard 2.1mm centre negative power supply socket (top-mounted).
Power requirements
9vDC power supply (no battery option). Current draw > 5mA.
Specification
-Length 112mm (4.41").
-Width 61mm (2.42") / 79mm (3.11").
-Height- 39mm (1.54").
-Weight 0.30 kg (0.66 lbs).
Sold out
SERIAL NUMBER 1530
Based on our multi award-winning King Fuzz circuit, this special edition has been re-biased around a beautiful gold-pin NOS germanium transistor. This pedal captures all our hallmark tube-esque sensitivity and character, with an astoundingly wide range of tones from light saturation through to nuclear meltdown.
Unlike typical Germanium fuzz pedals, this one can be placed anywhere in the signal chain and can even be used after buffers, active pickups, and wireless systems. This unique custom fuzz also features a toggle switch for true bypass or buffered bypass operation, making it perfectly versatile for any pedalboard.
Housed in a custom retro inspired enclosure and hand finished in genuine Burgundy Mist nitrocellulose lacquer.
Controls
-Gain pot (top left) adjusts the amount of distortion.
-Volume pot (top right) sets the output level.
-Output toggle switch (middle) selects true bypass (down) or buffered bypass (up).
-On/off footswitch (bottom middle) with true bypass wiring.
-On/off indicator LED (top middle).
Connections
-Mono 1/4" input and output jack sockets (side-mounted).
-Industry standard 2.1mm centre negative power supply socket (top-mounted).
Power requirements
9vDC power supply (no battery option). Current draw > 5mA.
Specification
-Length 112mm (4.41").
-Width 61mm (2.42") / 79mm (3.11").
-Height- 39mm (1.54").
-Weight 0.30 kg (0.66 lbs).
Sold out
SERIAL NUMBER 1523
Inspired by the tones of classic blues amplifiers from both sides of the Atlantic, we have created a truly unique drive pedal complete with a sweetly tuned three-band equaliser. It's the ultimate Swiss Army knife, capable of everything from deep luxurious American tones, right through to snarling British bite.
This pedal begins with a JFET circuit designed to mimic a high voltage tube, which provides a highly responsive input. This then feeds into a studio-quality transformer for inimitable ‘core saturation’ and increased harmonics. We then feed this signal into a stunning gold-pin germanium transistor to push it into blissful blues overdrive. Finally, the whole circuit is topped off with a specially designed tone-stack which encompasses all the classic sounds of both British and American amps. The result is a totally immersive sound, bursting with character, colour, and authenticity.
This pedal is inspired by classic non-master volume amplifiers, and features a Volume control without a separate Gain control. The amount of overdrive is dictated by the player’s dynamics and by adjusting the controls on the guitar. The overall level of the pedal can also be cranked up for maximum saturation.
Housed in a custom enclosure and hand finished in genuine Lake Placid Blue nitrocellulose lacquer, this special edition is the ideal choice for superb amp-like tones.
Unlike typical Germanium pedals, this one can be used with buffers, active pickups, and even wireless systems.
Controls
-Bass pot (top left) adjusts the amount of low frequencies.
-Middle pot (top middle-left) adjusts the amount of midrange frequencies.
-Treble pot (top middle-right) adjusts the amount of high frequencies.
-Volume pot (top right) sets the output level.
-On/off footswitch (bottom middle) with true bypass wiring.
-On/off indicator LED (top middle).
Connections
-Mono 1/4" input and output jack sockets (side-mounted).
-Industry standard 2.1mm centre negative power supply socket (top-mounted).
Power requirements
9vDC power supply (no battery option). Current draw > 5mA.
Specification
-Length 95mm (3.74").
-Width 122mm (4.79") / 151mm (5.95").
-Height- 39mm (1.54").
-Weight 0.35 kg (0.77 lbs).
Sold out
SERIAL NUMBER 1515
To celebrate our 15th anniversary we’ve built this very special one-of-a-kind fuzz pedal.
Based on our multi award-winning King Fuzz circuit, this special edition has been re-biased around a beautiful gold-pin NOS germanium transistor. This pedal captures all our hallmark tube-esque sensitivity and character, with an astoundingly wide range of tones from light saturation through to nuclear meltdown.
Housed in a custom retro inspired enclosure and hand finished in genuine "Goldtop" nitrocellulose lacquer, it also features special anniversary graphics (2009 - 2024) and fortuitously is the 1,515th Bigfoot pedal ever made.
Unlike typical Germanium fuzz pedals, this one can be placed anywhere in the signal chain and can even be used with buffers, active pickups, and wireless systems.
Controls
-Gain pot (top left) adjusts the amount of distortion.
-Volume pot (top right) sets the output level.
-On/off footswitch (bottom middle) with true bypass wiring.
-On/off indicator LED (top middle).
Connections
-Mono 1/4" input and output jack sockets (side-mounted).
-Industry standard 2.1mm centre negative power supply socket (top-mounted).
Power requirements
9vDC power supply (no battery option). Current draw > 5mA.
Specification
-Length 112mm (4.41").
-Width 61mm (2.42") / 79mm (3.11").
-Height- 39mm (1.54").
-Weight 0.30 kg (0.66 lbs).